Human Body Induction Microwave Sensor Pcb With High Frequency 4 Layer
Quick Detail :
| Type |
Pcb |
| Material |
Rogers |
| Layer |
4 |
| Size |
7*5cm |
| Permittivity |
3 |
| Color |
Yellow |
| Surface Finish |
ENIG |
Features:
1. Rogers pcb multilayer pcb with high frequency can improvide the products quality ,with high techolonogy treatment improve the life cycle of the products .Immersion gold surface finish make the pcb 's conductive performance enhancements. Multilayer pcb design ,the precision of the pcb improves much more better . Low dielectric : 3 dielectric conductivity much more precision .
Parameter:
| Parameter |
Value |
| Specific gravity/density |
1.850 g/cm3 (3,118 lb/cu yd) |
| Water absorption |
−0.125 in < 0.10% |
| Temperature index |
140 °C (284 °F) |
| Thermal conductivity, through-plane |
0.29 W/(m·K),[1] 0.343 W/(m·K)[2] |
| Thermal conductivity, in-plane |
0.81 W/(m·K),[1] 1.059 W/(m·K)[2] |
| Rockwell hardness |
110 M scale |
| Bond strength |
> 1,000 kg (2,200 lb) |
| Flexural strength (A; 0.125 in) - LW |
> 440 MPa (64,000 psi) |
| Flexural strength (A; 0.125 in) - CW |
> 345 MPa (50,000 psi) |
| Tensile strength (0.125 in) LW |
> 310 MPa (45,000 psi) |
| Izod impact strength - LW |
> 54 J/m (10 ft·lb/in) |
| Izod impact strength - CW |
> 44 J/m (8 ft·lb/in) |
| Compressive strength - flatwise |
> 415 MPa (60,200 psi) |
| Dielectric breakdown (A) |
> 50 kV |
| Dielectric breakdown (D48/50) |
> 50 kV |
| Dielectric strength |
20 MV/m |
| Relative permittivity (A) |
4.8 |
| Relative permittivity (D24/23) |
4.8 |
| Dissipation factor (A) |
0.017 |
| Dissipation factor (D24/23) |
0.018 |
| Dielectric constant permittivity |
4.70 max., 4.35 @ 500 MHz, 4.34 @ 1 GHz |
| Glass transition temperature |
Can vary, but is over 120 °C |
| Young's modulus - LW |
3.5×106 psi (24 GPa) |
| Young's modulus - CW |
3.0×106 psi (21 GPa) |
| Coefficient of thermal expansion - x-axis |
1.4×10−5 K−1 |
| Coefficient of thermal expansion - y-axis |
1.2×10−5 K−1 |
| Coefficient of thermal expansion - z-axis |
7.0×10−5 K−1 |
| Poisson's ratio - LW |
0.136 |
| Poisson's ratio - CW |
0.118 |
| LW sound speed |
3602 m/s |
| SW sound speed |
3369 m/s |
Description:
It announced TerraGreen, a halogen-free, ultra-low loss, RF/microwave/high-speed material. TerraGreen is engineered for such high-performance applications as power amplifier boards for 4G LTE base stations.PTFE and fiberglass fabric are the base materials for almost everything Taconic produces.
Key Benefits:
· Temperature and chemical resistance
· High dielectric strength
· Dimensional stability under heat and pressure
· Low electrical losses
· Low-friction/non-stick smooth surface
Typical Applications:
- Space Saving Circuitry
- Patch Antennas
- Satellite Communications Systems
- Power Amplifiers
- Aircraft Collision Avoidance Systems
- Ground Radar Warning Systems
- Datalink on cable systems
- Remote meter readers
- Power backplanes
- LMDS and wireless broadband
- Base station infrastructure
Production Description :
| Parameter |
Value |
| Specific gravity/density |
1.850 g/cm3 (3,118 lb/cu yd) |
| Water absorption |
−0.125 in < 0.10% |
| Temperature index |
140 °C (284 °F) |
| Thermal conductivity, through-plane |
0.29 W/(m·K),[1] 0.343 W/(m·K)[2] |
| Thermal conductivity, in-plane |
0.81 W/(m·K),[1] 1.059 W/(m·K)[2] |
| Rockwell hardness |
110 M scale |
| Bond strength |
> 1,000 kg (2,200 lb) |
| Flexural strength (A; 0.125 in) - LW |
> 440 MPa (64,000 psi) |
| Flexural strength (A; 0.125 in) - CW |
> 345 MPa (50,000 psi) |
| Tensile strength (0.125 in) LW |
> 310 MPa (45,000 psi) |
| Izod impact strength - LW |
> 54 J/m (10 ft·lb/in) |
| Izod impact strength - CW |
> 44 J/m (8 ft·lb/in) |
| Compressive strength - flatwise |
> 415 MPa (60,200 psi) |
| Dielectric breakdown (A) |
> 50 kV |
| Dielectric breakdown (D48/50) |
> 50 kV |
| Dielectric strength |
20 MV/m |
| Relative permittivity (A) |
4.8 |
| Relative permittivity (D24/23) |
4.8 |
| Dissipation factor (A) |
0.017 |
| Dissipation factor (D24/23) |
0.018 |
| Dielectric constant permittivity |
4.70 max., 4.35 @ 500 MHz, 4.34 @ 1 GHz |
| Glass transition temperature |
Can vary, but is over 120 °C |
| Young's modulus - LW |
3.5×106 psi (24 GPa) |
| Young's modulus - CW |
3.0×106 psi (21 GPa) |
| Coefficient of thermal expansion - x-axis |
1.4×10−5 K−1 |
| Coefficient of thermal expansion - y-axis |
1.2×10−5 K−1 |
| Coefficient of thermal expansion - z-axis |
7.0×10−5 K−1 |
| Poisson's ratio - LW |
0.136 |
| Poisson's ratio - CW |
0.118 |
| LW sound speed |
3602 m/s |
| SW sound speed |
3369 m/s |
|
Competitive Advantage:
1) With UL,ROHS,ISO,IPC
2).Lead time:3-10 working days
3)Competitive price best quality
4).Rich 20 years experience in High Tg Multilayer PCB .
What Information customer need to provide for quotation ?
1. PCB Gerber files ,protel,powerpcb,Autocad,etc.
2. BOM list for PCB assembly.
3. Send us your sample PCB or PCBA.
4. OEM is acceptable.
Product Tags:
|
|
Human Body Induction Microwave Sensor Pcb With High Frequency 4 Layer Images
|
